Improve the service life of fiber laser 1000watt 2000 watt cutting machine

1. The cnc fiber laser Cutting Machine with raycus ipg must be groundedThe advantages of line connection are:

• (1) It can ensure the normal operation of the laser power supply;
• (2) It can prolong the service life of the laser tube;
• (3) It can prevent external interference from causing system operation failures; it can prevent the circuit from accidentally burning due to high voltage discharge.

2. The water flow from the water tank to the laser tube should be kept clean.

The laser tube generated by the heat taken away by the cooling water has a higher temperature and a lower optical output power (preferred) at a temperature of 15 to 20°C; when the water breaks, due to the heat accumulated in the laser glass tube, the tube end will burst or even damage the laser power supply .

Therefore, the circulation of cooling water and turbid water must be checked at any time. When the water pipe breaks (dead bend) or falls off, it must be repaired in time to avoid equipment damage due to power outages. It is recommended to replace the pure water in the water tank every half a month.

3. Cleaning and maintenance;

good ventilation; always pay attention to the cleaning and maintenance of the machine is a necessary condition for the normal operation of the machine.

Imagine a person’s joints are not flexible, how to move? Machine tool rails are also a high-precision core component. After each work, the guide rail must be clean, kept smooth and lubricated. Each bearing also needs to be oiled regularly to make the transmission flexible, high processing accuracy, and prolong the service life of the machine.