What is dimensional chain

Basic Concept Of Dimensional Chain

The component ring that changes in the same direction as the closed ring is called an increased ring, that is, when the size of the component ring increases (or decreases) and the other component rings remain unchanged, the closed ring also increases (or decreases), as shown above D in a; n The component ring that changes in the opposite direction to the closed ring is called a reduced ring, that is, when the size of the component ring increases (or decreases) and the other component rings remain unchanged, the size of the closed ring decreases (Or increase), as d in the figure a above.

Classification of dimensional chain

• 1 Divided by application: assembly dimension chain, part dimension chain, process dimension chain.
• 2 According to the spatial position of each ring: linear dimension chain, planar dimension chain, spatial dimension chain. A common dimensional chain is a linear dimensional chain. The plane dimensional chain and the spatial dimensional chain can be converted into linear dimensional chain by the coordinate projection method. n According to the geometric characteristics of each ring size: length dimension chain, angle dimension chain.
• 3 This chapter focuses on the linear dimension chain in the length dimension chain.

In the dimension chain line diagram, the line segment with a single arrow is commonly used to indicate each ring, and the arrow only indicates the direction of searching the dimension chain to form a ring. The ring with the same direction as the arrow of the closed ring is the decreasing ring, and the ring with the opposite direction of the arrow of the closed ring is the increasing ring.

The parts shown, according to the dimensions A1 and A3 noted in the drawing, are not easy to measure during processing. Now they are processed according to the dimensions A1 and A2. To ensure the original design requirements, try to calculate the basic size and deviation of A2.

According to the title, according to the size A1, A2 processing, A3 must be a closed ring, A2 is the process size.

Then the basic size of the closed ring is 50-10 = 40mm

Lower deviation is 0

The upper deviation is -0.06-(-0.36) = + 0.30mm

There is no specific algorithm written above, so I will summarize it for everyone.

The opposite direction to the closed ring is the increasing ring, otherwise it is the decreasing ring.

The basic size of the closed ring is equal to the sum of the basic sizes of all the increasing rings minus the sum of the basic sizes of all the reducing rings

The upper deviation of the closed loop is equal to the upper deviation of the increasing loop minus the lower deviation of the decreasing loop

The lower deviation of the closed loop is equal to the lower deviation of the increasing loop minus the upper deviation of the decreasing loop

Link to this article： What is dimensional chain

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:https://www.cncmachiningptj.com/，thanks！

PTJ® provides a full range of Custom Precision cnc machining china services.ISO 9001:2015 &AS-9100 certified. 3, 4 and 5-axis rapid precision CNC machining services including milling, turning to customer specifications,Capable of metal & plastic machined parts with +/-0.005 mm tolerance.Secondary services include CNC and conventional grinding, drilling,die casting,sheet metal and stamping.Providing prototypes, full production runs, technical support and full inspection.Serves the automotive, aerospace, mold&fixture,led lighting,medical,bicycle, and consumer electronics industries. On-time delivery.Tell us a little about your project’s budget and expected delivery time. We will strategize with you to provide the most cost-effective services to help you reach your target,Welcome to Contact us ( [email protected] ) directly for your new project.

Link to this article：What is dimensional chain

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cut Wiki，Thanks!^^