Advantages of LXSHOW fiber laser cutting machine

Advantages of machine fiber laser cutting: 1530 fiber laser Cutting Machine can obtain better cutting quality because of the small laser spot, high energy density and fast cutting speed. The cutting slit of the laser cutting machine fiber 2kw is very thin and narrow, the two sides are parallel and perpendicular to the surface, and the dimensional accuracy of the cutting parts can reach ±0.05mm.

The cutting surface is clean and tidy, and the surface roughness is very low, only tens of microns. Laser cutting can be used as the last process without mechanical processing, and the parts can be used directly. After laser cutting, the width of the heat-affected zone is very small, and the performance of the material near the slit is almost unaffected, and the workpiece has small deformation, high cutting accuracy, good geometry of the slit, and the cross-sectional shape of the slit is relatively regular Rectangle.

High cutting efficiency: Due to the transmission characteristics of the laser, the fiber optic laser cutting machine is generally equipped with multiple numerical control worktables, and the entire cutting process can be fully controlled. The cutting speed is fast, and the material does not need to be clamped during laser cutting, which not only saves tooling fixtures, but also saves auxiliary time for loading and unloading.

Non-contact cutting: There is no contact between the torch and the workpiece during laser cutting, and there is no tool wear. To process parts of different shapes, you only need to change the output parameters of the laser. The laser cutting process has low noise, low vibration and no pollution.

There are many types of cutting materials: Compared with oxyacetylene cutting and plasma cutting, there are many types of laser cutting materials, including metal, non-metal, metal-based and non-metal-based composite materials, leather, wood, and fiber. But for different materials, due to their own thermophysical properties and different absorption rates for lasers, they show different laser cutting adaptability.