Introduction to the advantages of laser cutting and engraving technology in the garment industry

Clothing is a necessity for people, and it has appeared as early as the early stage of social development. With the development and progress of society, the function of clothing from a single cover the body to avoid the cold of the subsistence type of consumer demand, to fashion, culture, brand, image of the consumer trend, the popularity of society, the role of the aesthetics of clothing, clothing industry is facing the transformation and upgrading pressure.Since the laser was invented, through the unremitting efforts of scientists, laser technology has greatly contributed to the development of industrialization. At present, laser equipment has been widely used in the apparel industry, outlawing many traditional processing equipment, which is also profoundly promoting the transformation and upgrading of the entire apparel industry.Laser in the garment industry to promote the use of many benefits, such as the traditional washing process requires the use of a large number of chemical reagents and water, easy to cause environmental pollution and waste of resources, and cumbersome processing procedures and lead to very low production efficiency. The use of laser washing process, greatly simplifies the production and processing of clothing, more efficient and environmentally friendly.At present, the laser washing process for denim in Europe has outlawed the traditional washing process and become the current mainstream processing method.Laser marking is the most common form of processing in garment processing, and many of the fine patterns we usually see on garments are made by laser marking. Traditional textile fabrics need to go through the tedious processing process of grinding, ironing, embossing, etc., which is difficult to operate, cumbersome and has a long production cycle. With the adoption of laser marking machine, the tedious process is no longer needed, and the production is convenient and quick, the pattern is flexible, the image produced is clearer and more three-dimensional, and the natural properties of the fabric can be better expressed.Now, many denim manufacturers have started to adopt a laser engraving system that introduces digital processing methods, avoiding many drawbacks of the traditional process of difficult processing, complex processes, waste of raw materials and pollution, and the processing efficiency has reached 10 times that of the traditional process, and better processing results have been obtained.The laser is extremely suitable for cutting textile fiber fabrics because of its high focus, slim irradiation spot and small heat diffusion area.In the field of high-end fashion, laser is also favored by designers. 2017, the laser hollowing element of clothing fabric suddenly set off a whirlwind in the fashion industry. The exquisite and detailed pattern pattern, perforated and carved wisp effect, adds a strong artistic infection to the clothing, while compounding the taste of vintage and modern.Foreign designer Jamela Law created a series of clothing called Beeing Human, mainly using the current 3D printing technology. The series of clothing with 3D printing to produce the traditional needle and thread sewing can not achieve the shape. In the design stage, the structure is refined by using 3D printing design software, and then imported into 3D printing equipment for production, which is very convenient.Limited by technical reasons, 3D printing clothing is still mostly in the field of high-end fashion, production efficiency is not the traditional process, from efficient mass production is still a distance. However, with the iteration of technology, 3D mass-produced clothing is no problem at all.The docking of high technology with traditional industry helps to promote the industry to new and high-end development. The advantage of laser is that it can quickly engrave and hollow out various patterns on various fabrics, and flexible in terms of operation, while not causing any deformation on the surface of the material to reflect the color and texture of the fabric itself. It has a variety of advantages such as high engraving accuracy, hollowing without burr, arbitrary selection of shape, etc. The in-depth application of laser technology in the development of the garment industry will help the transformation and upgrading of the garment industry, making the garment production and processing industry from labor-intensive industries to a new type of processing industry with a higher degree of automation. Therefore, in the future we can foresee the use of lasers in the garment industry will certainly be more popular open.Guangdong China cut CNC Machinery Co., Ltd. is a high-tech industry enterprise specialized in researching, manufacturing and selling the machines as follows: Laser Engraver, Fiber Laser Marking Machine, CNC Router. The products have been widely used in advertisement board, crafts and molding, architecture, seal, label, woodcutting and engraving, stonework decoration, leather cutting, garment industries, and so on. On the base of absorbing the international advanced technology, we provide the clients the most advanced production and perfect after-sale service. In recently years, our products have been sold not only in China, but also as far as Southeast Asia, Middle east, Europe, South America and other overseas Markets.