Auto follow: the height will follow automatically during the cutting process.Automatic sorting: programming, nesting and nesting of parts to be cut.Automatic compensation: make up for the size difference caused by the cutting seam loss, and automatically perform material compensation to ensure product accuracy.Automatic edge finding: Perceive the inclination angle and origin of the sheet, and cut at the angle and position suitable for the sheet to avoid waste of raw materials.Breakpoint memory:

The system records the machine’s suspension state when the power is off, and the machine can continue to work on the original basis after restarting.Automatic leapfrog: Parabolic motion is used in the idle stroke to reduce the time of raising the cutting head and improve cutting efficiency, commonly known as “leapfrog”.

Automatically walk the frame: before the material is cut, confirm the processing range through the software setting, and make sure that the required cutting material does not shift.Automatically add lead: automatically set the lead position to prevent burns at the beginning and end of the workpiece.

Co-edge cutting: According to certain rules, the parts with long sides are arranged together as long as possible in a long-side-to-long-side manner. When the cutting command is generated, the common edge part of the outer contour of these parts is cut only once.

Save time and save materials.Can read DXF/AI/PLT format files and international standard G codesAutomatic micro link: During the cutting process, the parts and the plate are not separated to ensure that the parts are not deformed and the safety of the laser head during rapid movement.

Link to this article:Ten functions of fiber metal laser cutting machine software

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cut Wiki,Thanks!^^