Many companies use laser cutting equipment for cutting operations. Naturally, there are many things that need to be paid attention to when using laser cutting machines for typesetting. This is why the final typesetting effect of the same equipment is completely different. Let’s talk about what you should pay attention to when using laser cutting equipment for typesetting
- First, when using laser cutting equipment for typesetting, pay attention to the melting of the corners. Generally, as long as the steel plate being cut is not too thick, the corners will melt because of the high temperature. Therefore, it is recommended to use a small radius at the corners. Method for high-speed cutting, try to avoid melting at the corners.
- Second, when using laser cutting equipment, you should also pay attention to the setting of the part spacing. According to experience, the spacing should be as large as possible when cutting thick plates and hot plates. This is related to the amount of heat affected by the cut material. If you don’t pay attention to it, it is easy to cause so-called edge burning during cutting. Therefore, the greater the distance between the materials affected by the heat, the greater the distance between them.
- Third, pay attention to the lead setting when using laser cutting equipment for typesetting. In order to make the gap after cutting better connect, the best way is to quote a transition line at the beginning and the end of the cutting operation. That is to say the lead and tail, and it should be noted that it should be within the scope of the workpiece, and not even lead in sharp corners and other places that are not suitable for heat dissipation.
- Fourth, when operating the laser cutting equipment, it is natural to also pay attention to the problem of coedge cutting. Combining two parts or even more coedges into one combination can reduce the cutting operation time and improve work efficiency.
What I just mentioned is the things that need to be paid attention to when using laser cutting equipment for typesetting. Although they are all small details, they can determine the quality and efficiency of the cutting operation. Therefore, it is recommended to understand this knowledge before the cutting operation starts.
Link to this article：What to pay attention to when using laser cutting equipment for typesetting
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cut Wiki，Thanks!^^